Home About Us Safety Policy Products Careers Contact Us Enquiry

Our Products

Roofing and Wall Cladding Systems
We are engaged in offering roof and wall cladding system and metal roof and wall cladding system.
Metal Roof and Wall Cladding System

We offer our client metal roof and wall cladding system, which is available in:

  • Bare Galvalume (Natural Finish)
  • Colours Coated Galvalume (Colours as per choice) 

Standard specifications of the roofing panel:

Single skin roofing sheets in Bare Zincalume / Galvalume Trapezoidal profile sheet with 1000 - 1020 mm effective cover width and nominal 28-30 mm deep ribs with subtle square fluting in the five pans at nominal 200 -250 mm center-to-center. The end rib shall be designed for anti-capillary action, to avoid any seepage of water through the lateral overlap. The feed material is manufactured out of nominal 0.47 to 0.60 mm Total Coated Thickness (TCT), Hi-Tensile steel with min. 345 to 550 MPa yield strength, metallic hot dip coated with Aluminum-Zinc alloy (55% Aluminum, 45% Zinc) as per AS 1397 - Zincalume AZ150  to AZ 275 (Minimum coating of 150 to 275 gms/sq.mt total on both sides)The above sheets are also available in Colour: Super Polyester Colorbond XRW quality paint coat as per AS/NZS 2728 Class 3. The paint will have a total coating thickness of nominal 35 μm, comprising of nominal 20 μm exterior coat on top surface and nominal 5 μm reverse coat on back surface over nominal 5 μm primer coat on both surfaces of approved colour shade.

To fix the above profile sheets screws size required 12-14 x 55 mm with EPDM washer for roofing and 12-14 x 20 mm with EPDM washer for wall cladding). The fasteners shall be used confirming to AS 3566, Class III.

Kliplok / Klippon profile sheets: We also offer the roofing panel with concealed clip fixation, where not need to puncture the roofing panel to fix, the sheets get attached with a concealed clips underneath fixed on purls. 

Our Products Category

Client List